Mercedes-Benz Cls 500, Руководство оператора

Страница: 128 / 475

127
Controls in detail
Memory function
왔
Memory function
You can store up to three different settings
for each SmartKey or SmartKey with
KEYLESS-GO*.
The following settings are stored when
using the buttons on the driver’s door:
앫
Driver’s seat, backrest, head restraint
position and settings for multicontour
seat
앫
Steering wheel position
앫
Exterior rear view mirror positions
These SmartKey-dependent memory set-
tings can be deactivated if desired. For
information on SmartKey-dependent mem-
ory settings, see “Setting
SmartKey-dependency” (
컄
page 165).
The following settings are not
SmartKey-dependent. They are stored
when using the buttons on the front pas-
senger door:
앫
Front passenger seat, backrest, head
restraint position and settings for
multicontour seat
!
Prior to operating the vehicle, the driv-
er should check and adjust the seat
height, seat position fore and aft, and
seat backrest angle if necessary, to
ensure adequate control, reach and
comfort. The head restraint should also
be adjusted for proper height. See also
the section on air bags (
컄
page 61) for
more information on proper seat posi-
tioning.
In addition, adjust the steering wheel to
ensure adequate control, reach, opera-
tion and comfort. Both the interior and
exterior rear view mirrors should be
adjusted for adequate rear vision.
Fasten seat belts. Infants and small
children should be seated in a properly
secured restraint system that complies
with U.S. Federal Motor Vehicle Safety
Standards 213 and 225 and Canadian
Motor Vehicle Safety Standards 213
and 210.2.
Warning!
G
Do not activate the memory function while
driving. Activating the memory function
while driving could cause the driver to lose
control of the vehicle.