Mercedes-Benz CLS 2011, Руководство пользователя

Страница: 339 / 389

If you get TIREFIT on your clothing, have it
cleaned as soon as possible with perchloro-
ethylene.
X
Pull plug ? with the cable and hose A out
of the housing.
X
Screw hose A onto flange B of tyre seal-
ant bottle : .
X
Place tyre sealant bottle : head down-
wards into recess ; of the tyre inflation
compressor.
X
Remove the cap from valve C on the faulty
tyre.
X
Screw filler hose D onto valve C .
X
Insert plug ? into the 12 V socket
(
Y
page 309).
X
Turn the key to position 1 (
Y
page 139) in
the ignition lock.
X
Press on/off switch = on the tyre inflation
compressor to I.
The tyre inflation compressor is switched
on. The tyre is inflated.
i
First, TIREFIT is pumped into the tyre. The
pressure can briefly rise to approximately
500 kPa (5 bar/73 psi).
Do not switch off the tyre inflation com-
pressor during this phase.
X
Allow the tyre inflation compressor to run
for five minutes. The tyre should then have
attained a pressure of at least 180 kPa
(1.8 bar/26 psi).
!
Do not operate the tyre inflation com-
pressor for longer than eight minutes at a
time without a break. It may otherwise
overheat.
The tyre inflation compressor can be oper-
ated again once it has cooled down.
If a pressure of 180 kPa (1.8 bar/26 psi) has
been achieved after five minutes, see
(
Y
page 337).
If a pressure of 180 kPa (1.8 bar/26 psi) has
not been achieved after five minutes, see
(
Y
page 336).
Tyre pressure of at least 180 kPa
(1.8 bar/26 psi) not reached
If, after five minutes, a pressure of 180 kPa
(1.8 bar/26 psi) has not been achieved:
X
Switch off the tyre inflation compressor.
X
Unscrew the filler hose from the valve of
the faulty tyre.
X
Very slowly drive forwards or reverse
approximately 10 m.
X
Pump up the tyre again.
G
WARNING
If after five minutes a pressure of 180 kPa
(1.8 bar/26 psi) cannot be achieved, the tyre
is too severely damaged.
Do not drive any further. Consult a qualified
specialist workshop which has the necessary
specialist knowledge and tools to carry out
the work required. Mercedes-Benz recom-
mends that you use a Mercedes-Benz Service
Centre for this purpose. In particular, work
relevant to safety or on safety-related sys-
336
Flat tyre
Breakdown
assi
stanc
e