Version 17.02.2020
HW:
FV09(V41)
CI-VL2-MBN2
P
a
g
e
6
2.2.
Connecting the flex cables
A rotated and a normal 30pin flex cable are included in delivery. Depending on the
orientation of the flex cable connectors at the monitor panel and at the mainboard the
rotated or the normal flex cable have to be installed.
Connect the flex cable from the mainboard to J_IN of the external daughter PCB and the flex
cable from the monitor panel to J_OUT of the external daughter PCB.
Electrical the contacts have to be transmitted similar, in other words the left contact of the
monitor panel have to be connected with the left contact of the mainboard. Please take note
of the contact surfaces of the flex cables during installation.
Note:
Depending on the very navigation head-unit, the original flex cable needs to be
changed into a flex cable of the package contents. In this case, with the original flex cable
installed, the inserted picture will be scramble as if synchronization was missing.
from the monitor panel
from the mainboard
