Mercedes-Benz C-Class Saloon 2020, Руководство пользователя

Страница: 134 / 557

On very rare occasions, Adaptive Highbeam
Assist may fail to recognise other road users
with their own lighting, or may recognise
them too late.
In these, or in similar situations, the auto‐
matic high beam will not be deactivated or
will be activated despite the presence of
other road users.
#
Always observe the road and traffic
conditions carefully and switch off the
high beam in good time.
Adaptive Highbeam Assist cannot take into
account road, weather or traffic conditions.
Detection may be restricted in the following
cases:
R
In poor visibility, e.g. fog, heavy rain or snow
R
if there is dirt on the sensors or the sensors
are obscured
Adaptive Highbeam Assist is only an aid. You are
responsible for adjusting the vehicle's lighting to
the prevailing light, visibility and traffic condi‐
tions.
Adaptive Highbeam Assist automatically
switches between the following types of light:
R
Low beam
R
High beam
At speeds greater than 30 km/h:
R
If no other road users are detected, the high
beam will switch on automatically.
The high beam will switch off automatically in
the following cases:
R
At speeds below 25 km/h
R
If other road users are detected
R
If street lighting is sufficient
% The system's optical sensor is located
behind the windscreen near the overhead
control panel.
Switching Adaptive Highbeam Assist on/off
Switching on
#
Turn the light switch to the à position.
#
Switch on the high beam using the combina‐
tion switch.
If Adaptive Highbeam Assist is activated,
the _ indicator lamp will light up on the
multifunction display.
Switching off
#
Switch off the high beam using the combina‐
tion switch.
Light and sight 131
Internal use only