6. After the engine has started,
remove jum per cables by
exactly reversing the above
installation sequence, starting
with the last connection made
first. When removing each
clamp, make sure that it does
not touch any other metal while
the other end is still attached.
Important!
A discharged battery can freeze at
approx. + 14°F (-10°C ). In that
case, it must be thawed out before
jum per cables are used. A frozen
battery can explode and cause
personal injury.
Jumper cable specifications:
• Minimum cable cross-section of
25 mm2 or approx. 2 AWG
• Maximum length of 11.5 ft.
(3.5 m).
All except AMG version
Towing the Vehicle
The rear towing eye is located at
the right, below the bumper. The
front towing eye is located on the
passenger side behind a cover in
the bumper panel.
Cover removal: Insert finger in
recess on left end of cover and
pull cover out.
Cover installation for all except
AMG version: Engage cover at top
right and press cover in securely.
AMG version
Cover installation for AMG version:
Engage cover end (left arrow), and
press in cover end (right arrow)
securely.
We recommend that the vehicle
be transported using flat bed
equipment. This method is pre
ferable to other types of towing.
The vehicle may be towed with all
wheels on the ground and the
selector lever in position “ N ” for
distances up to 30 miles (50 km)
and at a speed not to exceed
30 mph (50 km/h).
’31 0033 B13
112
Содержание C 220 1996
