When replacing halogen bulbs do
not touch glass portion of bulb
with bare hands. Use plain paper
or a clean cloth.
Replacing Bulb:
Warning!
Halogen lamps contain
pressurized gas. A bulb can
explode if you:
• touch or move it when hot,
• drop the bulb,
• scratch the bulb.
Bulb for High and Low Beam
H1 or H1L (55 W)
Bulb for Fog Lamp
H3 (55 W)
Open hood.
Move retaining clamps (3) aside
and remove cover. Pull off electri
cal connector (6) or (7). Unhook
clamping ring and pull out bulb
together with clamping ring.
Remove bulb.
Insert new bulb (seating properly
in cutouts of bulb socket), mount
clamping ring. Reinstall and push
electrical connector on securely.
Reinstall cover and fasten with
retaining clamps (3).
Turn Signal, Parking, Side
Marker and Standing Lamp
(1157 [26.9/8.3 W/32/3 cp bulb])
Open hood.
Squeeze latch (4) together and lift
complete lamp assembly out to
front of vehicle. Twist bulb socket
(5) counterclockwise and pull out.
Push bulb into socket, turn
counterclockwise and remove.
Insert new bulb in socket push in
and twist clockwise. Reinstall bulb
socket. Reinstall lamp assembly
until properly seated and fasten
latch (4).
Содержание C 220 1996
