Mercedes-Benz BABY-SAFE plus II, Руководство по эксплуатации

Страница: 17 / 49

Installation in the vehicle
15
En
gl
ish (
U
SA)
X
10. Fold out D-SIP
®
f
on the side of the
vehicle door.
Note: The extended D-SIP
®
serves as
additional accident protection in the event
of a side impact. Never use it to carry or
secure the child seat.
Checklist for correct installation
For the safety of your child, check before
each journey that:
^
the child seat is installed against the
direction of travel.
^
the child seat is only attached to the front
passenger seat if no front passenger
airbag can act on the child seat.
^
the child seat is secured in the vehicle with
the LATCH as described above.
^
LATCH
j
is routed through the two blue
belt guides
c
of the child seat.
^
both LATCH arms
g
and
k
are engaged
in ISOFIX securing rings
h
of the vehicle.
^
D-SIP
®
f
on the side of the vehicle door
is folded out.
^
the LATCH is tightened and not twisted.
Installation with the vehicle's 2-point
seat belt
X
1. Securing the child in the child seat; see
page 10.
X
2. Place the child seat on a suitable vehicle
seat against the direction of travel and
secure it against tipping over.
Note: The inclination of the child seat is
correct if there is a space of about two
fingers at the front between the child seat
and the seat surface of the vehicle seat.
(Arrow)
X
3. Lock carrying handle
5
in the upper
position A .
15
G DANGER!
The seat belt must be pulled tight and must
not be twisted. If the seat belt of the child
seat is incorrectly secured or is not
secured at all, in the event of an accident,
abrupt braking maneuver or a sudden
change in direction, the child may
otherwise not be restrained and may be
seriously or fatally injured.