Mercedes-Benz B-Class Electric Drive W245, Руководство оператора

Страница: 140 / 314

!
Only use the charging cable to charge the
high-voltage battery. Do not use the charg-
ing cable for other purposes. It may other-
wise be damaged.
i
If you use the supplied 12 A charging
cable to charge a high-voltage battery:
R
the charge time increases considerably
R
electrical consumption increases consid-
erably
Where possible, charge the high-voltage
battery at a charging station (
Y
page 140).
Only then can certified electrical energy
consumption levels be reached.
i
The charging process can vary depending
on the charging station. Therefore, always
observe the local information.
Information about charging at a charging sta-
tion can be found at (
Y
page 140).
Stowing the charging cable
The charging cable can be stowed in a bag in
the trunk of the vehicle. To do so, the bag
must be secured to the cargo tie-down rings
using the retaining strap provided.
Controls on the charging cable
:
Alternating current status indicator
;
Control/protection system indicator
=
Charge current indicator
?
Charge current setting button
When displays : and ; on the charging
cable light up, this means the following:
Display : :
Lights up
green
The external power supply
connection is working prop-
erly. The high-voltage bat-
tery can be charged.
Flashes red A malfunction has been
detected in the external
power supply. The high-volt-
age battery is recharged as
soon as the electricity signal
registers normal values.
Lights up red There is a malfunction. The
charging cable must be
removed from the electrical
outlet and then re-inserted.
Display ; ;
Lights up
green
There are no malfunctions.
The high-voltage battery
can be charged.
Lights up red There is a malfunction. The
high-voltage battery cannot
be charged.
i
For information on problems relating to
the charging process, see (
Y
page 142).
Setting the maximum charge current
G WARNING
If the charge current draw via a mains socket
is too high during the charging process, the
external electrical system may overheat.
There is a risk of fire.
Before beginning the charging process, check
the maximum permissible charge current
locally. Consult a qualified expert to do so
where necessary.
If necessary, adjust your vehicle's settings.
!
An excessive charge current can blow a
fuse or lead to overheating of the external
power supply. Check whether the external
power supply is compatible with the set
138
Charging the high-voltage battery
Driving
and
parking