Selecting stations by entering the
frequency manually
X
Select
Radio
using the controller (slide
V
Æ
,
XVY
or turn
cVd
) and press
W
to
confirm.
X
Select
Enter Frequency
and press
W
to
confirm.
i
Only permissible numbers for the
frequency range can be entered in front of
the decimal point. If a non-permissible
number is entered after the decimal point,
the next lowest frequency is set.
X
Press the number keys on the number
keypad.
Audio 20 tunes in to the frequency.
Setting a station via the multifunction
steering wheel
X
In the audio menu in the instrument cluster:
press the
9
or
:
button briefly.
The next or the previous station from the
station list is set.
X
In the audio menu in the instrument cluster:
press and hold the
9
or
:
button for
longer than two seconds.
The previous or next station/channel in the
waveband will be set.
Storing stations
Storing stations manually
Ten stations can be stored for each
waveband.
i
If a selected preset is already occupied,
the new station will be stored in place of
the old station.
X
Quick save: once you have selected the
main area, press and hold a number key
(0 to 9) until you hear a tone.
The station is now stored on the selected
preset.
X
Directly in the station memory: press
W
the controller when the main area is
selected.
or
X
Select
Presets
using the controller (slide
V
Æ
,
XVY
or turn
cVd
) and press
W
to
confirm.
The station preset display appears.
The
#
dot in front of a preset position
indicates that the currently selected channel
is stored there.
X
To assign a new preset: slide
ZV
Æ
or turn
cVd
the controller and press
W
until you
hear a tone.
or
X
Press and hold a number key (0 to 9) on the
number keypad until you hear a tone.
The station is now stored on the selected
preset.
56
Radio mode
Audio