Mercedes-Benz AMG GT, Руководство оператора

Страница: 344 / 450

Mercedes-Benz recommends that you have the
oil change carried out at a qualified specialist
workshop.
Quality and capacity of engine oil
Missing values were not available at time of
going to print.
Model MB-Freigabe or
MB-Approval
Mercedes-AMG GT 43
4‑door Coupe
Mercedes-AMG GT 53
4‑door Coupe
229.51, 229.52,
229.61
229.71*
All other models 229.5*
229.51
* Recommended for lowest possible fuel con‐
sumption (lowest SAE viscosity class in each
case; observe possible restrictions of the
approved SAE viscosity classes).
To achieve the lowest possible fuel consumption,
it is recommended to use the engine oil specifi‐
cations marked in the table for the lowest SAE
viscosity class. Possible restrictions of the
approved SAE viscosity classes must be
observed.
Mercedes-AMG GT 63 4‑door Coupe 4MATIC
+, GT 63 S 4‑door Coupe : use engine
oils only of viscosity class SAE 0W-40 or SAE
5W-40.
The following values refer to an oil change,
including the oil filter.
Missing values were not available at time of
going to print.
Model Capacity
Mercedes-AMG GT 43
4‑door Coupe
Mercedes-AMG GT 53
4‑door Coupe
9.0 US qt
(8.5 liters)
All other models 9.5 US qt
(9.0 liters)
Notes on brake fluid
Observe the notes on operating fluids
(
/
page 339).
& WARNING Risk of an accident due to
vapor pockets forming in the brake sys‐
tem
The brake fluid constantly absorbs moisture
from the air. This lowers the boiling point of
the brake fluid. If the boiling point is too low,
vapor pockets may form in the brake system
when the brakes are applied hard.
This causes the braking effect to be
impaired.
#
Have the brake fluid renewed at the
specified intervals.
Have the brake fluid regularly replaced at a
qualified specialist workshop.
Only use a brake fluid approved by Mercedes-
Benz according to MB-Freigabe or MB-Approval
331.0.
342 Technical data