Mercedes-Benz AMG GT R 2018, Руководство пользователя

Страница: 300 / 409

On vehicles with the same front and rear wheel
size, you can interchange the wheels every
5,000 to 10,000 km, depending on the wear.
Ensure the direction of rotation is maintained for
the wheels.
It is imperative to observe the instructions and
safety notes on "Changing a wheel" when doing
so Preparing the vehicle for a wheel
change(
/
page 297).
Notes on storing wheels
When storing wheels, observe the following
notes:
R
After removing wheels, store them in a cool,
dry and preferably dark place.
R
Protect the tyres from contact with oil,
grease or fuel.
Overview of the tyre-change tool kit
Apart from some country-specific variants, vehi‐
cles are not equipped with a tyre-change tool kit.
For more information on which tyre-changing
tool kits are required and approved for perform‐
ing a wheel change on your vehicle, consult a
qualified specialist workshop.
Required tyre-change tools may include, for
example:
R
jack
R
chock
R
wheel wrench
R
centring pin
% The jack weighs approximately 3.4 kg.
The maximum load capacity of the jack can
be found on the sticker affixed to the jack.
The jack is maintenance-free. If there is a
malfunction, please contact a qualified spe‐
cialist workshop.
Setting up the folding chock
Preparing the vehicle for a wheel change
Requirements:
R
The required tyre-change tool kit is available.
If your vehicle is not equipped with the tyre-
change tool kit, consult a qualified specialist
workshop to find out about suitable tools.
Wheels and tyres 297