Mercedes-Benz AMG GT R 2018, Руководство пользователя

Страница: 117 / 409

g Removing the key
1 Switching on the power supply
2 Switching on the ignition
3 Starting the engine
#
shift the transmission to position j or i .
#
Depress the brake pedal.
#
Insert the key into the ignition lock and turn
to key position 3 .
#
If the vehicle does not start:
R
switch off consumers that are not
required.
R
remove the key from the ignition lock.
R
insert the key into the ignition again after
a short waiting period.
R
turn the key to key position 2 . the indi‐
cator lamps in the instrument cluster light
up.
R
turn the key to key position 3 .
% You can also switch on the power supply or
the ignition with the key. Additionally, turn
the key to key position 1 or 2 .
Running-in notes
To preserve the engine during the first 1,500 km:
R
drive at varying road speeds and engine
speeds.
R
do not drive faster than 140 km/h.
R
allow the engine to reach a maximum engine
speed of 4,500 rpm only briefly.
R
drive the vehicle in drive program A .
R
change gear before the rev counter needle is
Ô of the way to the red area of the rev coun‐
ter.
R
do not shift down a gear manually in order to
brake.
R
avoid overstraining the vehicle, e.g. driving at
full throttle.
R
do not depress the accelerator pedal past
the pressure point (kickdown).
R
only increase the engine speed gradually and
accelerate the vehicle to full speed after
1,500 km.
This also applies when the engine or parts of the
drivetrain have been replaced.
Please also observe the following running-in
notes:
R
in certain driving and driving safety systems,
the sensors adjust automatically while a cer‐
tain distance is being driven after the vehicle
has been delivered or after repairs. Full sys‐
114 Driving and parking