Mercedes-Benz A-Class 2020, Руководство оператора

Страница: 328 / 434

#
Pump the tire to the specified tire pressure.
The specified tire pressure is stated on the
label of the emergency spare wheel.
#
When the specified tire pressure has been
reached, press on and off switch 5 on the
tire inflation compressor to 0.
The tire inflation compressor is switched off.
#
Turn the SmartKey to position g in the igni‐
tion lock.
#
If the tire pressure is higher than the speci‐
fied pressure, press pressure release valve
button 7 until the correct tire pressure has
been reached.
#
Unscrew union nut 3 of filler hose 2 from
the valve.
#
Screw the valve cap of the emergency spare
wheel onto the valve again.
#
Stow filler hose 2 and plug 4 in the lower
section of the compressor housing.
#
Stow the tire inflation compressor in the
vehicle.
Inflating the emergency spare wheel
*
NOTE Overheating due to the tire infla‐
tion compressor running too long
#
Do not run the tire inflation compressor
for longer than ten minutes without
interruption.
Requirements:
R
Comply with the manufacturer's safety notes
on the sticker of the emergency spare wheel
and on the tire inflation compressor.
R
Remove the tire inflation compressor from
the stowage space under the cargo compart‐
ment floor (
/
page 275).
#
Remove sticker 1 from the tire inflation
compressor housing and affix it to the instru‐
ment cluster within the driver's field of
vision.
326 Wheels and tires