background image

Knowledge and compliance with the following relevant

specifications and policies are required for this guide:
• Accident prevention regulations
• Trade Association Policies for Vehicle Maintenance
• Rescue and Towing Companies' Association Policies
• Respective country's road traffic regulations
Compensation for damages and/or warranty claims

arising from towing or recovery measures will not be

accepted by Daimler Truck AG. If you are towing the

vehicle raised at the front, do not leave the engine

running and switch the electronic ignition lock to position

0.

Note

All vehicles that have been towed or recovered from

a breakdown must be examined for technical

condition and checked for damage at a qualified

workshop which possesses all the expertise and

tools required to properly perform the necessary

work.
You must observe the notes in chapter "Recovery".

Note

Modifications to electronic components, their

software or wiring can impair their functioning and/or

the functioning of other networked components.

Safety-relevant systems, in particular, may also be

affected.
Because of this, they may no longer function

properly and/or compromise the operational safety of

the vehicle. There is a heightened risk of accident

and injury!
Never carry out any modifications to the wiring and

electronic components or their software. Always

have work on electrical or electronic component

parts or their software performed at a qualified

workshop.

Safety and liability information

6

Actros, Antos and Arocs | Towing and recovery

General

Содержание 963 2022 Series

























































































Отзывы: