Mercedes-Benz 380 SE 1984, Руководство пользователя

Страница: 44 / 105

Radio
Showing the “old” setting first allows
for reconsideration of the decision
to store. If it is desirable to leave the
“old” frequency in memory rather
than exchanging it with the “new”
one, quickly release the button. The
“old” frequency will remain in
memory.
Any AM station can be stored
similarly on any button marked
EZ3
through
EZ3.
Stereo reception
The stereo indicator symbol
lights up if a stereo program is
received.
The radio is equipped with an auto­
matic stereo/mono switch that elec­
tronically switches to mono for clear
reception if a weak signal is
received. A special circuit provides
for a smooth change-over rather
than a hard sudden switching,
thereby reducing noise and inter­
ference.
The stereo indicator will remain lit
even if the receiver has changed to
the mono mode and will turn off at
an antenna signal considered insuf­
ficient to provide acceptable recep­
tion quality.
Tape Cassette playback
It is recommended to use only good
quality cassettes with a playback
time of not more than 60 to 90
minutes (C 60) or (C 90).
To start playback, insert a cassette
through the cassette door. Push the
cassette in until it is locked in its
playing position.
When the end of one playing side is
reached, the unit switches auto­
matically to reverse for playing the
second track.
Manual reverse can be activated by
depressing the cassette track
switch button l» n -w d . The built-in
indicators show the track of the
cassette the unit is playing back.
To stop playback, press the eject
button . The unit will auto­
matically eject the cassette and
switch to radio reception.
For fast tape rewind press the fast
rewind button m r a r i . The button
will lock into position until the end of
the tape is reached or until the
eject |'—— <| or fast for­
ward
ih m ii
button is activated.
Accordingly, for fast forward trans­
port of the tape, press the fast
forward button .
When the radio ist turned off by
pressing the “OFF” side of the
~l switch or by turning the
ignition key off, the cassette will
automatically be ejected.
Care and maintenance
To avoid a deterioration of the tone
quality, occasionally clean the tape
head with the special cleaner
supplied in your glove compartment
or available through your dealer.
To set clock
Turn ignition key to position “1” or
“
2
” .
Briefly press recessed time set
button E 9 by using a pencil or ball­
point pen.
Enter the time at which you want to
start the clock by sequentially
pressing four of the top row push
buttons
ED
through
EQ
. The time
entered will be displayed.
ON OFF