Mercedes-Benz 300 SD-TURBO DIESEL 1983, Руководство пользователя

Страница: 39 / 97

Radio
Direct frequency dialing
In order to select a station with a known frequency, select the wave band, press
the function button □ and then enter the frequency by pressing the
corresponding push buttons.
Example: FM 98.5 MHz AM 1050 KHz
Press any button marked
EE
through
33
ESI through
3 J
Press the function button
□
□
Enter frequency by pressing
m m Era
EE , 33 3 3 .3 3
When dialing a frequency directly, the number of the push buttons is not
displayed on the panel. The wave band is indicated by showing “ MHz” for FM
or “ KHz” for AM.
Note:
All AM stations have allocated frequencies ending with a “ 0” .
All FM stations have allocated frequencies ending with an odd
(uneven) digit after the decimal point.
Broadcasters sometimes may not give their exact frequency but the next
closest even number.
US radio frequency ranges: AM 540 -1 6 0 0 KHz
FM 88.1 -1 0 7 .9 MHz
Manual tuning (used to fine tune a
station or for manual scanning)
After selecting the desired AM or FM
wave band, press the function control
button
D
Press automatic station seeker
bar
(up or down) and hold
down. The frequency will increase or
decrease respectively in increments
of 0.1 MHz for FM or 1.0 KHz for AM.
Release the button when the desired
station is tuned in.
Unless the automatic station seeker
bar
is activated within
8 seconds after pressing the function
control button □
the manual tuning
will automatically be deactivated.
Safety Note
To avoid distraction of attention from
the vehicle’s operation and the road,
it is recommended NOT to perform
any manual tuning operations by the
driver while the vehicle is in motion.
Use the automatic station search
operation or preset stations instead.
Push button tuning
Six FM stations and four AM sta­
tions can be stored in memory
and recalled by pressing the
appropriate buttons marked E E
through 3 3 for FM or E□
through C D for AM stations.
To store stations in memory
Any FM station frequency dis­
played on the panel can be stored
on any button marked E E through
3 3 by depressing the button
desired and holding it until the display
has changed from the “ old” setting to
a “ blank” and then to the new
frequency to be stored.
37