Mercedes-Benz 260 E 124 1988, Руководство пользователя

Страница: 87 / 121

To gain access to the fuses, release
clamp (
1
), lift the fuse box cover up
and remove.
Before replacing a blown fuse, deter­
mine the cause of the short circuit.
Spare fuses are furnished inside the
fuse box. Observe amperage and co­
lor of fuse.
Always use a new fuse for replace­
ment. Never attempt to repair or
bridge a blown fuse.
After replacing the fuse, engage the
fuse box cover at the rear and secure
with clamp (
1
).
Fuses
The fuse box is located in the engine
compartment.
All equipment protected by fuses is
listed by number and letter on a label
in the lid of the fuse box. The numbers
and letters above the fuses corres­
pond to the ones on the label.
Spark Plugs
This vehicle is equipped with spark
plugs as required for driving in the
USA. If additional information is des­
ired, your authorized MERCEDES-
BENZ dealer will be happy to offer
advice.
Remove and install spark plugs (pro­
vided with sealing cone) only with
combination wrench from the vehicle
tool kit or with a recommended spark
plug wrench.
Tightening torque 1 0 -2 0 Nm
(7 - 1 5 Ib-ft).