Mercedes-Benz 2010 C 250, Руководство оператора

Страница: 94 / 364

In low ambient lighting conditions, the
following lamps will come on additionally:
R
Tail lamps
R
Parking lamps
R
License plate lamps
R
Side marker lamps
With the daytime running lamp mode
activated and the engine running, you cannot
switch off the low-beam headlamps manually.
Canada only
You can only switch on the high-beam
headlamps in low ambient lighting conditions.
The high-beam flasher is available at all times.
When the engine is running, and you
R
shift from a driving position to park
position
P with the vehicle at a standstill
(vehicles with automatic transmission) or
the parking brake is engaged, the low-beam
headlamps will go out with a delay of
3 minutes
R
turn the exterior lamp switch to position
T
, the low-beam headlamps, the tail
and parking lamps, the license plate lamps
and the side marker lamps come on
R
turn the exterior lamp switch to position
L
, the manual headlamp mode has
priority over the daytime running lamp
mode
The corresponding exterior lamps come on
(
Y
page 90).
USA only
You can only switch on the high-beam
headlamps in low ambient lighting conditions.
The high-beam flasher is available at all times.
When the engine is running, and you turn the
exterior lamp switch to position
T
or
L
, the manual headlamp mode has
priority over the daytime running lamp mode.
The corresponding exterior lamps come on
(
Y
page 90).
Fog lamps
Fog lamps cannot be switched on with the
exterior lamp switch in position
c
.
G
Warning!
In low ambient lighting or foggy conditions,
only switch from position
c
to
L
with
the vehicle at a standstill in a safe location.
Switching from
c
to
L
will briefly
switch off the headlamps. Doing so while
driving in low ambient lighting conditions may
result in an accident.
Fog lamps will operate with the parking lamps
and/or the low-beam headlamps on. Fog
lamps should only be used in conjunction with
low-beam headlamps. Consult your State or
Province Motor Vehicle Regulations
regarding permissible lamp operation.
X
Switch on the ignition.
X
Turn the exterior lamp switch to position
T
or
L
(
Y
page 90).
X
Switching on front fog lamps: Pull out the
exterior lamp switch to first stop.
The green indicator lamp
N
in the
instrument cluster comes on.
X
Switching on rear fog lamp: Pull out the
exterior lamp switch to second stop.
The rear fog lamp, the front fog lamps, the
green
N
and the yellow indicator lamp
R
in the instrument cluster come on.
X
Switching off front fog lamps/rear fog
lamp: Push in the exterior lamp switch to
its stop.
Locator lighting
The locator lighting is described in the
“Control system” section, see “Switching
locator lighting on or off” (
Y
page 134).
92
Lighting
Controls in detail
204_AKB; 5; 23, en-US
d2ureepe,
Version: 2.11.8.1
2009-07-16T17:54:06+02:00 - Seite 92