Mercedes-Benz 2008 CLS 550, Руководство оператора

Страница: 306 / 481

305
Operation
Tires and wheels
Restarting the Run Flat Indicator
The tire inflation pressure monitor must be
restarted in the following situations:
앫
If you have changed the tire inflation
pressure
앫
If you have replaced the wheels or tires
앫
If you have installed new wheels or
tires
왘
Using the Tire and Loading Information
placard on the driver’s door B-pillar or,
if available, the tire inflation pressure
label on the inside of the fuel filler flap,
make sure the tire inflation pressure of
all four tires is correct.
왘
Switch on the ignition (
컄
page 38).
Make sure the standard display menu
appears in the multifunction display
(
컄
page 139).
왘
Press button
k
or
j
repeatedly
until the following message appears in
the multifunction display:
Run Flat Indicator
Active
Menu: R-Button
왘
Press the reset button (
컄
page 27).
The following message will appear in
the multifunction display:
Restart
Run Flat Indicator?
Cancel
Yes
If you wish to confirm activation:
왘
Press button
æ
.
The following message will appear in
the multifunction display:
Run Flat Indicator
Restarted
Warning!
G
The Run Flat Indicator does not provide a
warning for wrongly selected tire inflation
pressures. Always adjust tire inflation pres-
sure according to the Tire and Loading Infor-
mation placard on the driver’s door B-pillar
(
컄
page 296) or, if available, on the tire in-
flation pressure label located on the inside
of the fuel filler flap.
The Run Flat Indicator does not replace reg-
ular checks of the tire inflation pressures
since a gradual pressure loss in more than
one tire cannot be detected by the Run Flat
Indicator.
The Run Flat Indicator is not able to issue a
warning due to a sudden dramatic loss of
tire inflation pressure (e.g. tire blowout
caused by a foreign object). In this case
bring the vehicle to a halt by carefully apply-
ing the brakes and avoiding abrupt steering
maneuvers.
Warning!
G
The Run Flat Indicator can only warn you in
a reliable manner if you have set the correct
tire inflation pressures for each tire.
If an incorrect tire inflation pressure was
set, the system will monitor the pressure ac-
cording to the incorrect value. 컄컄