Mercedes-Benz 2008 CL-Class, Руководство оператора

Страница: 224 / 769

223
Control systems
COMAND navigation system (entering a destination)
Entering predefined destinations
왘
Select “ Navi ” “ Destination ”
“ Stopover ”.
If a stopover has already been entered,
you can change it.
왘
Changing: Select “ Change Stop-
over ”.
You can now select a category.
왘
Selecting a category:
Select category, e.g. “ Gas station ”.
COMAND first looks for destinations
within the immediate vicinity of the ve-
hicle and near the vehicle’s route. If
there are no destinations available
there, COMAND searches for destina-
tions in an area around the vehicle po-
sition.
If COMAND does not find any destina-
tions, you will see a message to this ef-
fect.
왘
Select “ OK ”.
You can now select a different cat-
egory.
If COMAND finds destinations, you will
see a list of the destinations and details
of how far away they are in the
right-hand side of the display. The in-
formation about how far away the des-
tinations are can take a few seconds to
be displayed.
The left-hand part of the display shows
the destinations on the map. The desti-
nation marked in the list is highlighted
in the map.
왘
Selecting a destination: Select the
desired destination from list.
The address of the destination ap-
pears.
왘
Starting route calculation:
Select “ Start ”, see also (
컄
page 218).
Entering another destination as a
stopover
왘
Select “ Navi ” “ Destination ”
“ Stopover ”.
왘
Entering: Select “ Other ”.
You can select between the following
menu items:
앫
“ Address Entry ”
앫
“ From Memory ”
앫
“ From Last Destinations ”
앫
“ From POIs ”
왘
Select a menu item.