Mercedes-Benz 2007 SLK 280, Руководство оператора

Страница: 302 / 473

301
Operation
Engine compartment
The coolant expansion tank is located on
the passenger side of the engine compart-
ment.
SLK 350 (example illustration)
1
Coolant expansion tank
2
Cap
3
Marking bar in the expansion tank
왘
Using a rag, turn cap
2
slowly approx-
imately one half turn counterclockwise
to release any excess pressure.
왘
Continue turning cap
2
counterclock-
wise and remove it.
The coolant level is correct if the level
앫
for cold coolant: reaches marking
bar
3
in expansion tank
1
앫
for warm coolant: is approximately
0.6 in (1.5 cm) higher
왘
Add coolant as required.
왘
Replace and tighten cap
2
.
For more information on coolant, see
“Coolants” (
컄
page 448).
앫
Using a rag, slowly open the cap approx-
imately
1
/
2
turn to relieve excess pres-
sure. If opened immediately, scalding
hot fluid and steam will be blown out un-
der pressure.
앫
Do not spill antifreeze on hot engine
parts. Antifreeze contains ethylene
glycol which may burn if it comes into
contact with hot engine parts.