Mercedes-Benz 2007 SLK 280, Руководство оператора

Страница: 166 / 473

165
Controls in detail
Automatic transmission*
Canceling gear range limit
왘
Pull and hold right shift paddle
2
until D reappears in the multifunction
display (
컄
page 157).
The transmission will shift from the
current gear range directly to gear
range
D .
Shifting into optimal gear range
왘
Pull and hold left shift paddle
1
.
The transmission will automatically
select the gear range suited for optimal
acceleration and deceleration. This will
involve shifting down one or more
gears.
Manual shift program*
Manual shift program is available on
vehicles with AMG-Sport Package* and
SLK 55 AMG only.
In addition to the automatic shift
program
C or S , your vehicle is equipped
with the manual shift program M .
In the manual program mode M ,
system-controlled automatic gearshifting
is switched off and you need to change the
gears by manually upshifting or downshift-
ing using the steering wheel gearshift
paddles (
컄
page 164) or the gear selector
lever.
The program mode selector switch is
located on the lower part of the center
console.
Program mode selector switch
M Manual For manual gear shifting
C Comfort For comfort driving
S Sport For standard driving
The selected program mode appears in the
multifunction display (
컄
page 161).
!
Allow engine to warm up under low load use.
Do not place full load on the engine until the
operating temperature has been reached.
Shift into reverse gear R or park position P only
when the vehicle is stopped.
Avoid spinning of a drive wheel for an extended
period when driving off on slippery road
surfaces. This may cause serious damage to the
drivetrain which is not covered by the
Mercedes-Benz Limited Warranty.
i
For information on automatic program
modes C or S , see “Automatic shift program”
(
컄
page 161), “Gear selector lever one-touch
gearshifting” (
컄
page 162), and “Steering wheel
gearshift control one-touch gearshifting*”
(
컄
page 163).