Mercedes-Benz 2004 CL 500, Руководство оператора

Страница: 52 / 418

51
Getting started
Driving
Single wipe
왘
Press switch briefly in the direction of
arrow
1 .
The windshield wipers wipe one time
without washer fluid.
Wiping with windshield washer fluid
왘
Press switch in the direction of
arrow
1 past the resistance point.
The windshield wiper operates with
washer fluid.
For information on filling up the washer
reservoir, see “Windshield washer system
and headlamp cleaning system”
(
컄
page 269)
!
If anything blocks the windshield wip-
ers (leaves, snow, etc.), switch them off
immediately.
앫
For safety reasons,
앫 turn off the engine by turning
the SmartKey to position
0 and
withdraw SmartKey from starter
switch
or
앫 turn off the engine by pressing
the KEYLESS-GO* start/stop
button and open the driver’s
door (with the driver’s door
open, starter switch is in
position
0 , same as with
SmartKey removed from starter
switch)
before attempting to remove any
blockage.
앫
Remove blockage.
앫
Turn the windshield wipers on
again.
If windshield wipers fail to function at
all in switch position
I ,
앫
set the combination switch to the
next highest wiper speed
앫
have the windshield wipers
checked at the nearest authorized
Mercedes-Benz Center