Mercedes-Benz 2004 CL 500, Руководство оператора

Страница: 266 / 418

265
Operation
Engine compartment
Adding engine oil
CL 500, CL 55 AMG
1 Oil dipstick
2 Filler cap
왘
Unscrew filler cap 2 from filler neck.
왘
Add engine oil as required. Be careful
not to overfill with oil.
Be careful not to spill any oil when adding.
Avoid environmental damage caused by oil
entering the ground or water.
왘 Screw filler cap 2 back on filler neck.
CL 600
1 Filler cap
왘
Unscrew filler cap 1 from filler neck.
왘
Add engine oil as required. Be careful
not to overfill with oil.
!
Only use approved engine oils. For a
listing of approved engine oils, refer to
the Factory Approved Service Products
pamphlet in your vehicle literature port-
folio.
In addition, check the oil filler cap for
important information pertaining to the
engine oil needing to meet a specific
Mercedes-Benz specification
(e.g. MB 229.5). If such information is
printed on the oil filler cap, only use an
engine oil from the list of approved en-
gine oils in the Factory Approved Ser-
vice Products pamphlet that meets the
specification indicated on the oil filler
cap.
Using engine oils of other specification
may cause the FSS to incorrectly deter-
mine the next service interval and will
result in engine damage not covered by
the Mercedes-Benz Limited Warranty.
!
Excess oil must be siphoned or drained
off. It could cause damage to the en-
gine and catalytic converter not cov-
ered by the Mercedes-Benz Limited
Warranty.
컄컄