Mercedes-Benz 2003 CL 500, Руководство оператора

Страница: 251 / 384

251
Operation
Tires and wheels
If you wish to cancel activation:
왘
Press the
ç
button.
If the following message appears in the
multifunction display field:
REACTIVATE TIRE
PRES. MONITOR
or
TIRE PRES.
CHECK TIRES!
왘
Check the tire inflation pressures and
correct them if necessary.
왘
Reactivate the tire inflation pressure
monitor.
Rotating wheels
On vehicles with the same wheel size all
around, wheels can be rotated every 3000
to 6000 miles (5000 to 10000 km), or
sooner if necessary, according to the de-
gree of tire wear. The same direction of tire
rotation must be retained.
Rotate the wheels before the characteris-
tic tire wear pattern becomes visible
(shoulder wear on front wheels and tread
center wear on rear wheels).
Thoroughly clean the inner side of the
wheels after each rotation. Check and en-
sure proper tire inflation pressure. It is
necessary to activate the tire inflation
pressure monitor*.
Warning!
G
Rotate front and rear wheels only if they are
of the same size.
!
If your vehicle is equipped with a tire in-
flation pressure monitor*, there are
electronic components built into the
wheel.
Do not use mounting tools in the area
of the valve as they could damage the
electronic components.
To prevent damage or incorrect instal-
lation, have the tires changed at an au-
thorized Mercedes-Benz Center.
Warning!
G
Have the tightening torque checked after
changing a wheel. Wheels could become
loose if not tightened with a torque of
110 ft.lb. (150 Nm).
Use only genuine Mercedes-Benz wheel
bolts specified for your vehicle's rims.