Mercedes-Benz 2003 CL 500, Руководство оператора

Страница: 154 / 384

154
Controls in detail
Good visibility
Windshield wipers
Information on the windshield wipers is
found in the “Getting started” section
(
컄
page 47).
A rain sensor automatically controls the
windshield wipers depending on how wet
the windshield is.
왘
Switch on ignition.
왘
Set the wiper switch to position I
(
컄
page 47).
After the initial wipe, pauses between
wipes are automatically controlled by the
rain sensor which monitors the wetness of
the windshield.
Headlamp cleaning system
The switch is located on the left side of the
dashboard.
1 Headlamp washer switch
왘
Switch on ignition.
왘
Press switch 1 .
i
Intermittent wiping is interrupted when
the vehicle is at a standstill and a front
door is opened.
!
To prevent the windshield wipers from
being damaged, do not leave the wiper
switch in intermittent setting when the
vehicle is taken to an automatic car
wash or when cleaning the windshield.
The switch should not be left in inter-
mittent setting as the wipers will wipe
the windshield once every time the en-
gine is started. Dust that accumulates
on the windshield might scratch the
glass when wiping occurs on a dry
windshield.
i
If intermittent wiping is on and you turn
the key in the steering lock from posi-
tion
1 to position 2 (
컄
page 31) and
keep the key in that position longer
than 2 seconds, the wipe interval will
be set to approx. 5 seconds.