Mercedes-Benz 2001 S 600, Руководство оператора

Страница: 59 / 157

59
Combination Switch
1 Low beam (exterior lamp
switch position )
2 High beam (exterior lamp
switch position )
3 High beam flasher (high beam
available independent of
exterior lamp switch position)
4 Turn signals, right
5 Turn signals, left
To signal minor directional changes,
such as changing lanes on a highway,
move combination switch to the point
of resistance only and hold it there.
To operate the turn signals
continuously, move the combination
switch past the point of resistance (up
or down). The switch is automatically
canceled when the steering wheel is
turned to a large enough degree.
6 Press switch briefly:
One wipe without washer water
(select only if window is wet) Press
switch past resistance point:
Windshield washer, windshield
wiper; headlamp cleaning system
(only in exterior lamp switch
positions or Canada
only: also in position when the
engine is running)
7 Windshield wiper
0 Wiper off
I Intermittent wiping
II
Normal wiper speed
III Fast wiper speed
Note:
The windshield washer reservoir,
hoses and nozzles are automatically
heated.
Turn Signal Failure
If one of the turn signals fails, the turn
signal indicator system flashes and
sounds at a faster than normal rate.