Mercedes-Benz 190 E 2.3, Руководство пользователя

Страница: 46 / 101

Showing the “ old” setting first allows
for reconsideration of the decision to
store. If it is desirable to leave the “old ”
frequency in mem ory rather than ex­
changing it with the “ new ” one, quickly
release the button. The “ old ” frequen­
cy will remain in memory.
Any AM station can be stored similarly
on any button marked H jJ through PTT
Stereo reception
The stereo indicator symbol
lights up if a stereo program is re­
ceived.
The radio is equipped with an autom a­
tic stereo/mono switch that electro­
nically switches to mono for clear re­
ception if a w eak signal is received. A
special circuit provides for a smooth
change-over rather than a hard sudden
switching, thereby reducing noise and
interference.
The stereo indicator will remain it even
if the receiver has changed to the
mono mode and will turn off at an an­
tenna signal considered insufficient to
provide acceptable reception quality.
Tape Cassette playback
It is recommended to use only good
quality cassettes with a playback time
of not more than 60 to 90 minutes
(C 60) or (C 90).
To start playback, insert a cassette
through the cassette door. Push the
cassette in until it is locked in its
playing position.
When the end of one playing side is
reached, the unit switches autom ati­
cally to reverse for playing the second
track.
Manual reverse can be activated by
depressing the cassette track switch
b u tto n 0 E f||ii]. The built-in indicators
show the track of the cassette the unit
is playing back.
To stop playback, press the eject but­
ton
The unit will automatically
eject the cassette and switch to radio
reception.
For fast tape rewind press the fast re­
wind button r i l c j S i l . The button will
lock into position until the end of the
tape is reached or until the eject
lT— or fast forward I but t on
is activated.
Accordingly, for fast forward transport
of the tape, press the fast forward but-
When the radio is turned off by press­
ing the “ O FF” side of the
switch or by turning the ignition key off,
the cassette will autom atically be
ejected.
Care and maintenance
To avoid a deterioration of the tone
quality, occasionally clean the tape
head with the special cleaner supplied
in your glove compartment or available
through your dealer.
To set clock
Turn ignition key to position 1 or 2.
Briefly press recessed time set button
by using a pencil or ballpoint pen.
Enter the time at which you want to
start the clock by sequentially pressing
four of the top row push buttons Q 3
through EEI- The time entered will be
displayed.