Mercedes-Benz 190 E 2.3 1991, Руководство пользователя

Страница: 42 / 129

Unfastening
Push in the red button (3) in the belt
buckle (2).
Allow the retractor to completely re­
wind the seat belt by guiding the latch
plate (1).
Operation:
The inertia reel stops the belt from
unwinding during sudden vehicle
stops or when quickly pulling on the
belt.
The locking function of the reel may
be checked by quickly pulling out the
belt.
The emergency tensioning retractors
tighten the fastened front seat belts,
during frontal and front-angled impacts
exceeding the first threshold of the
SRS (see page 42).
Lap belt for center seating position of
the rear seat
Pull belt with latch plate (1) over lap so
that the belt is positioned as low as
possible on your hips and not across
the abdomen. Push latch plate (1) into
buckle (2) until it clicks. Do not twist
the belt but keep it tight.
To tighten the belt: With the latch plate
engaged, pull the loose end of the
belt.
To lengthen the belt: With the belt un­
fastened, turn the latch plate so that it
is a little more than 90° perpendicular
to the belt, then extend the belt. Fas­
ten the belt and tighten as stated
above.
To disengage the belt, push red
button (3) in the buckle.
If the center seat is not occupied, the
belt buckle and rolled-up seat belt can
be stored in the space next to the rear
arm rest (to the left or right of arm
rest).
40