Mercedes-Benz 190 E 2.3 1991, Руководство пользователя

Страница: 36 / 129

Warning!
Do not adjust the driver’s seat
while driving. Adjusting the seat
while driving could cause the
driver to lose control of the
vehicle.
Never ride in a moving vehicle
with the seat back reclined. Sitting
in an excessively reclined posi­
tion can be dangerous. You could
slide under the seat belt in a colli­
sion. If you slide under it, the belt
would apply force at the abdomen
or neck. That could cause serious
or even fatal injuries. The seat
back and seat belts provide the
best restraint when the wearer is
in an upright position and belts
are properly positioned on the
body.
Storing seat/head restraint positions in
memory:
D Memory button.
E Position buttons “ 1 ” and “2” .
Two sets of seat/head restraint posi­
tions may be programmed into me­
mory. After the seat/head restraint are
positioned, push memory button D,
release, and within 3 seconds push
position button “ 1” . A second set of
positions for the same seat/head
restraint can be programmed into
memory by pushing first button D and
then “2” .
Recalling seat/head restraint positions
stored in memory:
To recall a seat/head restraint posi­
tion, push position button “ 1” or “2”
until seat/head restraint movement
has stopped. For safety reasons, the
seat/head restraint movement stops
after releasing the position button.
Caution!
Do not remove head restraints except
when mounting seat covers. For re­
moval refer to “ Practical Flints” ,
page 98. Whenever restraints have
been removed be sure to reinstall
them before driving.
34