T-SI-82.70/131
n
May 2000
6
5. Reinstall the lower dash panel making sure
that the cables routing into the radio
compartment are not stressed and are
unobstructed.
6. Locate the cable-clip retaining hole (A, Figure
10) just below and to the left of the linear
compensator (B, Figure 10).
Figure 10
P82.70-2950-01
7. Route the telephone cable harness to this
point and press the cable-clip (already
attached to the harness) into the retaining
hole (Figure 11).
Figure 11
P82.70-2951-01
D. Making electrical connections
1. Connect the 14-pole green connector from the telephone harness to the connector at the bottom of the
linear compensator.
2. Connect the 3-pole black power connector from the telephone harness to the mating connector on the
vehicle radio harness.
3. Connect the 2-pole green microphone connector from the telephone harness to the mating connector on
the vehicle radio harness.
4. Connect the male RJ-45 connector from the vehicle radio harness to the mating connnector on the PSE
harness.
