FAN INSTALLATION INSTRUCTIONS
6
Rev 4.0
4.
Carefully lift motor assembly onto hanger
bracket. Install ball joint onto the hanger
bracket opening. Rotate fan until notch on
downrod ball engages the ridge on the
hanger bracket. This will allow hands free
wiring. Connect the wires in accordance to
the wiring diagram provided.
5.
Lift the canopy up to the hanger bracket,
making sure not to break any wire
connection. Secure the canopy using canopy
screws supplied. Cover up canopy screws
using screw cover.
6.
This fan is approved for and can safely be used with 2
x MAX 20W CFL globes. For optimum lighting effect
we recommend 2 x 12W CFL globes. Insert two B22
CFL globes (not supplied) into lamp holders. Dry
your hands before installing globes. Keeping the
globe clean is important as useful lifetime of a dirty
globe could be shorter than a clean globe. Locate
indentations on the neck of lamp diffuser and align
them with protrusions on light kit. Lift the diffuser
allowing the protrusions to engage the indentations
on the diffuser. Twist the diffuser clockwise to lock it
into place.
Note:
Twist the diffuser anticlockwise to remove it
for lamp replacement.
