SAFETY PRECAUTIONS
3
Rev 4.0
8.
Check and confirm, after the fan is completely installed, that all connections are proper and
secure to prevent the fan from falling or causing property damages or personal injury.
9.
Take care not to bend or damage the motor Drive Shaft or Fan Blades when handling or
installing them. If such defect is noticed, please contact the Customer Service before
installation of the ceiling fan.
10.
Both the fan with light kit (accessory) and the hanging bracket must be earthed.
11.
Use of an unapproved wall controller voids the warranty. Only Mercator wall controllers are
approved for use with Mercator ceiling fans. Do not use solid state wall controllers.
12.
This fan is compatible with some HOME IT systems. Please contact Mercator for further details.
13.
Do not remove the fan from the ceiling after installation.
14.
Make sure electricity is turned off at the main power box before commencing work. Turn off
the power by removing fuse or turning off circuit breaker before installing the fan and
replacing lamps.
