PROCEDURES
STEP 1
1-1. Put the 3 pcs post brackets on
each position on the base as shown
in the picture.
1-2. Use 3 Medium Bolts(M8x16) to
join the post brackets and stand.
STEP 2
2-1. Put the post on the top of 3 pcs
post brackets.
2-2. Use 6 Large Bolts and Flange
Nuts (M6) to connect the post to the
3 pcs post brackets. Tighten the
bolts and nuts.
STEP 3
Place the tank housing on the stand.
STEP 4
4-1. Remove the 4 bolts from the
burner.
4-2. Put the gas hose through into
the post.
4-3. Fix the burner unit to the post
by the 4 bolts.
STEP 5
5-1. Check whether the connection
of vertical post and burner are
assembled according to instrucions,
and all bolts and nuts are tightened.
5-2. Put 6 pcs Large Flat Washers on 3
Reflector Spacers.
STEP 6
Fasten the reflector with 3 pcs
Large Flat Washers and 3 pcs
Wing Nuts.
STEP 7
7-1. Bring up the tank housing and
rest it on the post plate.
7-2. Connect the end thread of inlet
gas hose to the regulator.
7-3. Connect the regulator to the gas
tank and tighten it with adjustable
wrench.
7-4. Put LPG gas tank on the stand.
7-5. Fasten cylinder with propane
tank strap.
Bolt
Stand
Post bracket
STEP 1
Bolt
Post
STEP 2
Nut
STEP 3
Tank housing
STEP 4
Bolt
STEP 5
Reflector Spacer
STEP 6
Reflector
Wing nut
STEP 7
Regulator
Gas tank
39
