The MX65W-HW bottom panel
Please note that the serial number is located on the product label, which is located on the
bottom of the MX65W-HW. The blank region in the center of the label will be populated with
regulatory marks on commercial units.
Mounting hardware
The supplied wall screws and anchors allow you to mount the appliance on a drywall
surface, either vertically or horizontally. The distance between the holes you drill should be
165 mm.
•
For mounting on drywall, use a
¼
-in drill bit, then insert the plastic and screw assemblies.
•
For mounting on wood or a similar surface, use only the screws.
•
Allow the heads of the screws to stick out far enough to be inserted securely into the back
of the appliance.
Connecting to the WAN
All Meraki MX devices must have an IP address. This section describes how to configure
your local area network before you deploy it. A local management web service, running on
the appliance, is accessed through a browser running on a client PC. This web service is
used for configuring and monitoring basic ISP/WAN connectivity.
