EN
25
• Do not use an extension cord unless absolutely necessary.
• The appliance must be connected to an earthed power outlet with a nominal voltage of 230
VAC, 50 Hz. Place the power cord behind the product so that it is protected and there is no risk of
tripping over it.
USE
Connect the wine cooler to a correct mains voltage according to the type plate. An extension cord of
up to 3 m can be used if the cross-sectional area is at least 1.5 mm².
• Set the required temperature from 8 to 18°C with the buttons
and
, in steps of 1°C.
– For red wine we recommend 12–18°C and for white wine 8–10°C. The display shows the
actual temperature.
• Press the C°/F° button to switch between the units Celsius and Fahrenheit.
• Press the Light switch to switch the light on/off in the wine cooler.
The shelf can be removed to accommodate larger bottles.
MAINTENANCE
Cleaning
Carefully clean the product before using it for the first time.
• Disconnect the product from the mains supply.
• Wipe the inside and outside with a soft, damp cloth and a mild detergent.
• Take out and clean the water receptacle.
• Make sure that the seal is clean and fits tightly.
Moving the wine cooler
• Remove all the bottles from the wine cooler.
• Secure all loose objects in the wine cooler with tape.
• Fold in the adjustable feet against the casing to avoid damage.
• Tape the door shut when closed.
• The wine cooler should stand upright when transported.
