EN
24
INSTALLATION
Before using for the first time
• Remove all internal and external packaging.
• Check that the following parts are included:
– 1 pull-out shelf
– 1 copy of operating instructions
• Clean the unit with lukewarm water and a soft cloth.
Setting-up
The product is intended for indoor use and should not be placed in a patio, basement or the like.
• Place the wine cooler on a level and stable surface that can withstand the weight of the product
and its contents and wait about 2 hours before connecting it to the mains. This procedure
reduces the risk of the cooling system malfunctioning as a result of its transportation.
• The wine cooler needs an adequate air flow to function properly. Leave 8 cm of free space on all
sides.
• Do not put the unit in a warm place, or in the vicinity of flammable materials.
• The feet on the wine cooler can be adjusted if the surface is not horizontal.
• The unit should only be used in non-stationary areas (e.g. boats) if it has been installed by
qualified technicians to ensure its safe and correct use.
• Make sure the door on the wine cooler is properly closed when the unit is in use, otherwise it will
consume more energy.
• The unit has not been designed to run via a converter for direct current to alternating current.
NOTE:
Do not place the product in direct sunlight or near sources of heat such as a radiator or cooker.
Direct sunlight can damage the casing, and sources of heat can increase the consumption of energy.
The recommended ambient temperature is from 10 to 26°C. Higher or lower temperatures can
reduce the performance of the product so that it cannot reach the set temperature, or keep it at a
constant level. The temperature can vary, depending on whether the light is switched on, or not, and
at which level the bottles have been placed.
WARNING:
Incorrect use of an earthed plug can cause electric shock. A damaged power cord must be replaced by
an authorised service centre, or other qualified personnel, to ensure safe use.
• The plug must be plugged into a correctly installed earthed mains socket. Never modify the plug
in any way.
