EN
35
material shiny.
• Many fabrics are easier to iron when they are not completely dry, silk for example should always
be ironed when damp.
• Garments become more wrinkled if the washing machine is full and when spin drying at high speed.
Ironing with steam
1.
Turn the temperature control and steam control to
2.
Plug in the power cord. When the travel iron has reached the set temperature the status
lamp goes off and steam is produced automatically during the ironing. Wait until the status
lamp has gone off before ironing, otherwise water can drip from the soleplate.
Ironing without steam
1.
Empty the water reservoir
2.
Move the steam control to and set the required temperature with the temperature
control.
3.
Plug in the power cord. When the travel iron has reached the set temperature the status
lamp goes off.
NOTE:
If there is water in the reservoir and the temperature control is set to ••• steam will be
produced automatically.
IMPORTANT:
The status lamp comes on during ironing to indicate that the appliance is heating up to
maintain the set temperature. If you lower the temperature after ironing at a high temperature, do
not start ironing until the status lamp comes on.
After use
1.
Turn the temperature control to "MIN".
2.
Unplug the power cord, remove adapter where appropriate, and allow the iron to cool
standing upright on the heel.
3.
If there is any water left in the reservoir, open the cap, turn the iron upside down and shake
out the water. Replace the cap.
4.
Press the handle lock button and fold down the handle.
5.
Wind up the power cord round the iron.
