EN
21
short circuit. The product has
a power cord with an earth
conductor and an approved
earthed plug. Contact an
authorised electrician or our
service personnel if you have
any questions about the
earthing instructions or the
product’s earthing. An
extension cord must also be
earthed.
• Do not place heavy objects
on the power cord. Place the
power cord so that it cannot
be stood on, or clenched.
• Do not use the product if the
power cord or plug are
damaged. A damaged power
cord or plug must be
replaced by an authorised
service centre or other
qualified personnel to ensure
safe use.
• Switch off the product
immediately and pull out the
plug if there is a problem.
• Do not pull the power cord to
pull out the plug.
• Do not touch the product,
the power cord or plug with
wet hands.
SAFETY INSTRUCTIONS
• Place the product on a level,
dry, water and heat resistant
surface.
• Stand the product upright for
24 hours before plugging it
in, otherwise the product can
be damaged and will not
work properly.
• Do not put the product on a
shelf, in a cupboard, or other
enclosed space. Ensure good
ventilation.
• Do not place the product
over an amplifier or other
equipment that can get hot
– risk of material damage.
• Do not expose the product to
vibrations, moisture, extreme
temperatures, or direct
sunlight.
• Check that the mains voltage
corresponds to the rated
voltage on the type plate.
• The product must be
connected to an earthed
power point. Earthing
reduces the risk of electric
shock by diverting the
current in the event of a
