MEN 04M036N01, Руководство пользователя

Страница: 14 / 32

Getting Started
MEN Mikro Elektronik GmbH 14
20M036N00 E2 – 2009-07-27
1 Getting Started
This chapter gives an overview of the board and some hints for first installation in a
system.
1.1 Integrating the Board into a System
You can use the following "check list" to install the M-Module on a carrier board for
the first time and to test proper functioning of the board.
;
Power-down the system.
;
Install the M-Module carrier board in your system without the M-Module.
;
Power-up the system.
;
Test the carrier board.
;
If O.K., power-down the system and remove the carrier board.
;
Install the M-Module in slot 0 of the carrier board.
;
Insert the carrier board into the system again.
;
Power-up the system.
;
Load a suitable debugger.
;
Read one word from the base address plus
0xFE
.
;
If a bus error is occurring now, the M-Module is not plugged properly or the
carrier board is not set up correctly (e. g. D201 PLD must be loaded). Please
refer to the carrier board’s user manual for details.
1.2 Installing Driver Software
For a detailed description on how to install driver software please refer to the
respective documentation.
You can find any driver software available for download on MEN’s website .