Getting Started
MEN Mikro Elektronik GmbH
32
20BL50S00 E2 – 2014-12-10
2.2.5
Installing an SD Card
Within its housing, the BL50S provides one SD card slot. Carry out the following
steps to install an SD card.
The SD card slot is positioned at the edge of the system, wedged between the
PCB and the top of the housing.
Insert the SD card into the slot with the contacts facing to the PCB and the cut
edge to the right side.
Make sure that it clicks into place properly.
To eject the SD card, push it until it springs out, then simply pull it out.
2.2.6
Installing an mSATA Drive
Within its housing, the BL50S provides one mSATA slot. Two M2.5x8 screws are
provided with the BL50S.
Untighten and remove the screws from the spacers (highlighted in red).
