Getting Started
MEN Mikro Elektronik GmbH
29
20BL50S00 E2 – 2014-12-10
2.2.4
Installing SA-Adapters
Two SA-Adapters can be mounted in the BL50S on the 10-pin receptacle for slots
X1 and X2.
Carry out the following steps to install the SA-Adapters:
For installing SA-Adapters remove the front panel by loosening the eleven
screws marked in red in the following pictures.
Be careful not to lose the small metal plates between the front panel and the
SATA holders!
For installing SA-Adapters the front panel has to be removed and
special care must be taken to realign the connectors and the LEDs
precisely. You should choose the SA-Adapters before ordering the box
PC so that the SA-Adapters can be installed at MEN.
!
