Getting Started
20NM50-00 E2
2016-05-17
Page 24
2.3.3
Installing PCI Express Mini Cards
Within its housing, the NM50 provides two PCI Express Mini card slots. The M2.5x8
screws, required for installation, are already secured to the board. Carry out the
following steps to install a PCI Express mini card
»
Loosen and remove the M2.5x8 screws from the spacers
»
Insert the PCI Express mini card carefully at a 30° angel
»
Make sure that all the contacts are aligned properly and the card is firmly connected
to the connector
»
Align the spacers and the holes, and insert the screws
»
Fix the card by tightening the screws
Figure 9.
Installing a PCI Express Mini Card
See
Chapter 2.3.2 Opening the NM50 on page 23
for information on how to open the
housing to access the internal PCI Express Mini Card connectors.
PCIe
Mini Card
30°
Card connector
