SC2500 User Guide Ver 2.1
May 6, 2003
Page 25 of 26
Number of Blinks
Error
1
No Flash memory detected
2
Invalid Remap Table – drive automatically write
protected
3
Remap Table disabled (SW1-7 ON)
7.3 Unit does not respond to SCSI commands -
If the unit passes power-up diagnostics, but does not respond to SCSI
commands, there may be a SCSI ID contention among the SCSI bus units.
Make sure that every SCSI ID used on the bus is different. See section 5 to
find out how to change the SCSI ID of the unit.
