Part No. 2321-0159
2. Mounting Instructions
Additional tools required, not included in this kit:
7/16” or 11mm wrench.
1.
2.
Cover the gas tank and front fender with towels to
avoid damage during installation
.
3. Install the two mounting plates onto the fairing, using
the acorn nuts and washers supplied with the fairing.
(See Fig 1)
4. Loosely install the fork clamps, approximately 1 3/4”
apart. (See Fig 2)
Start with each fork clamp bushing adjusted to the rear
of the slot. (See Fig 3)
5.
Slip the fairing mounting plates and fairing onto the fork
clamp bushing. (See Fig 4)
6.
Secure the Left and Right side Trigger Lock, locking
mechanism. (See Fig 5)
7.
Adjust the height, angle and alignment of the
fairing then tighten
all
bolts
8.
Fig 1
Fig 2
Loosen Allen Screw to
adjust Bushings to desired
fairing angle.
Rear of slot
Fig 3
Fig 4
Step 1
Step 2
Step 3
Step 4
Fig 5
NOT CORRECT
CORRECT
Fully engaged Locking
Mechanism
The Fusion of Style & Function
11
MS Batwing Cruiser Fairing Mounting Kit
Victory Kingpin
