For Build 050109 and later
5
Understanding the Back Panel
The back panel has seven connectors, each containing two status indicators.
WAN
(Power Out)
Connects the Flanger4Plus to the dedicated network used
for communication between a pair of Flanger4Plus units.
LINK
– Link is present. Blink indicates activity.
100
– Ethernet port operating speed. OFF indicates 10
MB, ON indicates 100 Mb.
LAN
Allows a locally connected PC to access the Flanger 4Plus
and connected equipment. It is possible that large amounts
of traffic through this port can interfere with proper
operation.
LINK
– Link is present. Blink indicates activity.
100
– Ethernet port operating speed. OFF indicates 10
MB, ON indicates 100 Mb.
DS1
Up to four DS1 lines may be connected to these ports. Note
that there may be unused ports for your configuration.
LINK
– Lit when a DS1 signal is present and the port is
enabled.
ACTIVITY
– Blinks when there is activity on the DS1
line.
Local
(Power In)
Connects Flanger4Plus to a local area network via the
Flanger4Plus power supply.
LINK
– Link is present. Blink indicates activity.
100
– Ethernet port operating speed. OFF indicates 10
MB, ON indicates 100 Mb.
