For Build 050109 and later
11
Using Equalizer Control Settings
Equalization settings are used to match the DS1 analog front end to the
length and characteristics of the cabling connected between the
Flanger4Plus unit and other TDM equipment.
Short haul settings are used in an intra-office installation. For short haul T1
installations, the EQ settings are directly determined by the cabling distance
between the Flanger4Plus and other equipment. For short haul E1
installations, there is only one EQ setting choice.
Cable Diagrams
Flanger4Plus uses RJ-45 connectors for DS1 and Ethernet cables. The cable
diagrams in the following sections refer to pin numbers. These pin numbers
refer to the actual pins illustrated below.
