06
Reservation Heating
Press the clock icon twice to set a time reservation. The screen will show “H01” as a default,
which means 1 Hour. Press +/- to adjust from 1-24 Hours. After flashing for 3s the reservation
is set and the machine starts to countdown.
The machine will heat in the last hour of the the countdown time shown on the screen.
After the countdown is finished, the screen displays the real-time temperature and the
machine will automatically cool down to the proper temperature (127°F) and beep 3 times.
It will keep at this temperature until powered off.
4. After the wax is totally melted,
insert the heat-insulating grid when using the aluminum pot
.
Spread your fingers/toes and slowly dip your hand or foot in the machine to test the
temperature. Immerse your hand or foot in the wax for 2s.
5. Gently remove your hand or foot from the machine and wait for 3s.
6. Repeat steps 4-5 for three to six times. You can also use the brush to apply wax.
7. Cover your hand or foot with a plastic liner. Then put your hand or foot into the thermal
mitt to retain heat for 15 minutes.
8. After 15 minutes, remove the mitt and liner and peel the hardened wax from the top of
your wrist or ankle. Discard the used plastic liner and wax.
9. When finished, power off the machine and unplug. The remaining wax can be used for
next time.
3
Содержание AURA PWM65
Страница 12: ......