Memorex MVDT2002, Руководство по обслуживанию

Страница: 19 / 202

DISASSEMBLY INSTRUCTIONS
B2-5
Fig. 2-14-A
NOTE
In case of the Pinch Roller Cam and Main Cam
installation, install them as shown in the circled section
of Fig. 2-15-B so that the markers meet. (Refer to Fig.
2-14-B)
And also can be seen the Main Chassis hole through the
Main Cam maker hole.
2-14:
Remove the E-Ring
1
, then remove the Main Cam.
Remove the E-Ring
2
, then remove the Pinch Roller
Cam and Joint Gear.
1.
2.
MAIN CAM/PINCH ROLLER CAM/JOINT GEAR
(Refer to Fig. 2-14-A)
1
Main Cam
Pinch Roller Cam
Joint Gear
2
1.
NOTE
1. When you install the Loading Arm S Unit, Loading Arm
T Unit and Main Loading Gear, align each marker.
(Refer to Fig. 2-15-B)
Fig. 2-15-B
Loading Arm T Unit
Main Loading Gear
Marker
Marker
Loading Arm S Unit
2-16:
Remove the Polyslider Washer
1
.
Remove the Clutch Ass'y and Ring Spring.
Remove the Clutch Lever.
Remove the Coupling Gear, Coupling Spring and
Clutch Gear.
1.
2.
3.
4.
Fig. 2-16-A
1
Clutch Ass'y
Coupling Gear
Clutch Lever
Ring Spring
Coupling Spring
Clutch Gear
CLUTCH ASS'Y/RING SPRING/CLUTCH LEVER/
CLUTCH GEAR (Refer to Fig. 2-16-A)
2-15: LOADING GEAR S/T UNIT (Refer to Fig. 2-15-A)
1.
2.
Remove the E-Ring
1
and remove the Main Loading
Gear.
Remove the Main Rod, Tension Lever, Loading Arm S
Unit and Loading Arm T Unit.
1
Main Rod
Main Loading Gear
Tension Lever
Loading Arm T Unit
Loading Arm S Unit
Fig. 2-15-A
Fig. 2-14-B
Pinch Roller Cam
Main Cam
Marker