Memorex MVD2113, Руководство по обслуживанию

Страница: 71 / 116

DISASSEMBLY INSTRUCTIONS
B1-2
1.
2.
3.
4.
5.
6.
Make the short circuit on the position as shown Fig. 1-5
using a soldering. If you remove the DVD Deck with no
soldering, the Laser may be damaged.
Remove the 4 screws (1).
Remove the DVD Deck in the direction of arrow (A).
Disconnect the following connectors:
(CP2601, CP2602 and CP2603).
Remove the 2 screws (2).
Remove the DVD PCB in the direction of arrow (B).
1-5: DVD PCB/DVD DECK (Refer to Fig. 1-5)
Fig. 1-5
When the installation of the DVD Deck, remove all the
soldering on the short circuit position after the connection of
Pick Up PCB and DVD PCB connector.
NOTE
DVD PCB
Deck Angle
(1)
(2)
Make the short circuit
using a soldering.
Pick Up PCB
(B)
(A)
(2)
(1)
(1)
(1)
DVD Deck